Introduction

Methodology

Meritest 712

- Mode / Use

- Functions

- Sales Conditions

Test-Kits

Seminar

FAQ

Functions

The basic functions of BioResonance

The MERITEST® 712 has the following possibilities:

• Global/Normal
• Inversion
• Amplification
• Reduction (with the use of an exterior REDUCTOR)

Furthermore, and for the first time, new ideas in BioResonance have been integrated in the MERITEST® 712. These are:

• Impulse Mode
• Growing Amplification
• Increased Frequency Range

In the MERITEST® 712, 20 basic programs have been memorized. These greatly improve the comfort of use of the equipment. This way, frequently used adjustments, like for example the 'basic program' or the one against pains, can be recalled immediately and after that can be adapted through the manual modifications to best tune for a better effectiveness.
We have voluntarily rejected using a high number of programs because Bioresonance is an individualized approach, which cannot be applied by sophisticated and generalist programs.

The new functions of the MERITEST® 712

A. Impulse Mode, normal and inversed.
The impulse mode permits a finer use than a stable duration would allow. During a time of 100 milliseconds, the body receives the signal, followed by a defined pause of 400 milliseconds.

This adjustment is very important, especially during the control. For a short period, the signal is provided to the body. If it reacts to these short length signals, the controlled substance has a high resonance.

The impulse mode replaces the frequency filters commonly used in BioResonance. The use of a frequency filter normally produces a displacement in the phase fields of the signal. This implies that the production of the signal is not done exactly in phase, and depending on the filter, this signal can show a displacement of +90° to -90°. Since we would not expect such a displacement to occur, the desired results, using filters, might not achieve the desired effects, ensuing a lack of results that cannot be apparently explained.

Using the impulse mode, first incorporated in the MERITEST® 712, we started from the viewpoint that we can achieve superior results if the whole information of the testing substance is used. We presume that a substance, in most cases, is composed of several frequencies. If this ensemble of frequencies is fractioned thought the use of a fix frequency filter, we do not receive the whole information of the tested substance. If it were not the case, it would only be necessary to work with a generator of fixed frequencies.

The impulse mode in the MERITEST® 712 always offer the frequencies in its entirety without displacement of phase!

B. Growing Amplification
In the MERITEST® 712, the amplification can be augmented from 1 to 100.
Besides, 3 variable amplifications can be used, from 1 to 10, from 1 to 50, and from 1 to 100. Experiences, especially linking to the draining of allergens, have shown that a mild growing amplification brings significant advantages. Each time, the body has 10 seconds to adapt to the signal before it is increased by one level. This process permits an intensive draining of allergens in a very short period. During the variable amplification, the duration is automatically indicated. Furthermore, we recommend only using the impulse mode during a growing amplification.

C. Increased Frequency Range
New researches have demonstrated that the commonly used mode of frequency of 150KHz is insufficient in numerous cases. For this reason, the frequency range in the MERITEST® 712 has been increased to approximately 900 KHz. This way, we arrive at the frequency level of parasites, mycoses, virus and bacteria.

Important Note:

In practice, it is desirable to limit to localized zones or to precise functions and then to control with an EAV equipment MERITEST 707B or 705 (or another techniques) if the chosen program is the right one.